EN 
ES 
Hydraforce CV10-20-0-N-70 Piloted Spool-Type Logic Element Valve, 70 PSI
SKU: CV10-20-0-N-70
Hydraforce Part Number: CV10-20-0-N-70
Screw-in, cartridge style, hydraulic check valve for use as a blocking or load-holding device.
The valve allows flow passage from port 1 to port 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at port 1 to open to port 2.
NOTE: 300 PSI bias spring option with tall cap available.
- 20 GPM Max Flow
- 3500 PSI Rated (240 Bar)
- Fits CV10-20 Cavity
- Uses Size 10 (5/8″ Hole) Solenoids
Specifications:
Pressure Rating:
- 240 bar (3500 psi)
Proof Pressure:
- 350 bar (5075 psi)
Flow Rating:
- 75.8 lpm (20 gpm)
Maximum Internal Leakage:
- 2 drops/min Note: At 240 bar (3500 psi)
Operating Fluid Temperature:
-
- -40 to 100 °C (-40 to 212 °F) Note: With buna N seals
- -26 to 204 °C (-15 to 400 °F) Note: With fluorocarbon seals
- -54 to 107 °C (-65 to 225 °F) Note: With polyurethane seals
- -40 to 149 °C (-40 to 300 °F) Note: With HNBR seals
Storage Temperature:
- -40 to 70 °C (-40 to 160 °F)
Ambient Temperature:
- -40 to 90 °C (-40 to 194 °F)
Fluids:
- Mineral based or synthetic hydraulic fluid with lubricating properties
Fluid Viscosity Range:
- 7.4 to 420 cSt
Maximum Operating Contamination Level:
- 20/18/14 per ISO 4406
Installation Specifications:
Cavity:
- VC10-2
- 10-size-2-way Cavities
Cartridge Installation Torque:
- 32.6 to 35.4 N-m (24 to 26 ft-lb)
Maximum Allowable Torque:
- 67.8 N-m (50 ft-lb)
Orientation Restriction:
- None
| Weight | 0.19 lbs |
|---|
Be the first to review “Hydraforce CV10-20-0-N-70 Piloted Spool-Type Logic Element Valve”
Reviews
There are no reviews yet.